One-Click Fiber Cleaner Pen K-SC (2.5 mm, SC/FC/ST)
One push cleans an SC, FC or ST end face — through the adapter or in your hand — with a fresh strand of cleaning thread every time, 800+ cleans a pen.
Typical work: Cleaning SC, FC and ST end faces in FTTH terminals, ODFs and splice closures before splicing or patching; GPON and access-network field work, where SC (including SC/APC) is the working connector; Field installs: clean every connector before it is mated, through the adapter, without unpatching the panel; A pocket consumable for every installer kit — pairs with the 1.25 mm K-LC pen for LC and MU work.
Get a Quote WhatsApp UsNeutral stock in small lots, or private label made to your requirements. Prices on request — EXW factory pricing.
K-SC key features
- One push, one clean: press the pen in until it clicks — the tip rotates a half turn while a fresh length of densely woven microfiber thread sweeps the end face, lifting dust, oil and debris without scratching it
- 800+ cleans per pen: the thread advances automatically with every push, so clean number 800 is wiped with unused thread, exactly like clean number one
- Dry cleaning — no alcohol to carry, spill or wait on, and no solvent residue left on the end face
- Cleans connectors where they live: through the adapter on the panel, and unmated connectors in the hand; SC, FC and ST, UPC and APC polish
- A window on the body shows the thread remaining, so the pen never runs out mid-job without warning
K-SC specifications
| Ferrule size | 2.5 mm |
|---|---|
| Connectors | SC, FC, ST |
| Polish types | UPC and APC |
| Cleans per pen | 800+ |
| Cleaning action | One push (one-click); the tip rotates 180° with every push |
| Cleaning medium | Dry woven microfiber thread — no alcohol or solvents |
| Cleaning targets | Adapter-mounted and unmated connector end faces |
| Body | Antistatic resin, with thread-remaining window and lock button |
| Dimensions | 17.5 × 17.5 × 175 mm |
| Weight | — |
How It Works — one push, fresh thread, a half-turn sweep
The guide tip centres the pen on the ferrule. Push the body in until it clicks: the cleaning tip presses a fresh strand of densely woven microfiber thread against the end face and rotates a half turn (180°) as it wipes, so the thread sweeps the whole contact zone instead of dragging the same dirt across it. The thread then advances automatically, ready for the next connector.
A dirty end face is the cheapest fault in fiber work and the easiest to prevent: dust, oil and debris on the ferrule cause loss, reflectance and scratched mating faces. Dry thread lifts the contamination off without solvents — nothing to carry, nothing to spill, and no residue left behind to attract the next layer of dust. The antistatic resin body helps the cleaned face stay clean.
Work through the panel: the pen cleans connectors where they sit, through the adapter, and loose connectors held in the hand. A window on the body shows how much thread is left; when it runs out, replace the pen — it is a consumable, not a tool to refill. Keep the guide cap on between jobs (it is tethered to the pen, so it does not get lost), and never reuse a section of thread or take the pen apart.
Where the K-SC works
Cleaning SC, FC and ST end faces in FTTH terminals, ODFs and splice closures before splicing or patching
Part of the Fiber Cleaning range — see the specifications above for the figures that matter on this work.
GPON and access-network field work, where SC (including SC/APC) is the working connector
Part of the Fiber Cleaning range — see the specifications above for the figures that matter on this work.
Field installs: clean every connector before it is mated, through the adapter, without unpatching the panel
Part of the Fiber Cleaning range — see the specifications above for the figures that matter on this work.
A pocket consumable for every installer kit — pairs with the 1.25 mm K-LC pen for LC and MU work
Part of the Fiber Cleaning range — see the specifications above for the figures that matter on this work.
K-SC components
- One K-SC one-click cleaner pen (2.5 mm, white)
Documents for this model
Product Catalog 2026 — this model appears in our full-range catalog (PDF), published in the Downloads center.
User manual — if you need the manual for this model now, ask via the inquiry form below or on WhatsApp and we will send the available documents with your quote.
More fiber cleaning
Questions about the K-SC
Can the K-SC carry our own brand?
Private labeling is made to your requirements and confirmed per order — labels with your logo, part numbers and barcodes on the tools, the inner boxes and the outer cartons, ready for your warehouse. The products most often labeled are the K-35 cleaver, the KS-1 Kevlar shears and the K-870 stripper.
Can we order a small lot, unbranded?
Yes. Neutral stock is held for the core range: small lots are welcome, you can mix models in one shipment, and restock as you sell. Prices are on request — EXW factory pricing.
Ask for a quote — K-SC
Tell us the quantity, and whether you want it neutral or with your brand on it.