Fiber Cleaning Box K-CB550 (Cassette Type)
A bench cassette that wipes SC, FC, ST and LC end faces on fresh microfiber tape — 550+ cleans on one core, and when the core is done you swap the core, not the box.
Typical work: Jumper and pigtail production lines — clean every end face before test and packing; Repair and refurb benches: bulk cleaning of returned jumpers and adapters; Panel dressing and commissioning: work through a full ODF or distribution panel in one session; Field kits that see volume: pair with one-click pens — the box for the bench and panel work, the pens for the pole and the premises.
Get a Quote WhatsApp UsNeutral stock in small lots, or private label made to your requirements. Prices on request — EXW factory pricing.
K-CB550 key features
- 550+ cleans per core: every wipe runs on fresh, unused microfiber tape, so clean number 550 is wiped exactly like clean number one
- The core swaps, not the box: when the tape is spent, open the case, fit a replacement core and keep working — the cheapest cost per clean in the cleaning drawer
- One slot takes the whole bench: SC, FC, ST and LC, 2.5 mm and 1.25 mm ferrules, UPC and APC — the body label also lists D4, MU, MT and DIN
- Dry cleaning — no alcohol to carry, spill or wait on, and no solvent residue left on the end face
- Made for volume work: production lines, repair benches and panel dressing, where connectors are cleaned by the hundred, not one at a time
K-CB550 specifications
| Type | Cassette (reel) type end-face cleaner, lever tape advance |
|---|---|
| Connectors | SC, FC, ST, LC — also D4, MU, MT, DIN (per body label) |
| Ferrule sizes | 2.5 mm and 1.25 mm |
| Polish types | UPC and APC |
| Cleans per core | 550+ |
| Cleaning core | Replaceable — swap the core, keep the box; replacement cores available |
| Cleaning medium | Dry microfiber tape — no alcohol or solvents |
| Body | Green or blue housing |
| Dimensions | 125 × 85 × 35 mm |
| Weight | 167 g |
How It Works — fresh tape for every wipe
Open the shutter, seat the connector in the slot at 90 degrees and draw it across the exposed window of cleaning tape: the densely woven dry microfiber lifts dust, oil and debris off the end face without scratching it. A lever advance then moves the tape on, so the next connector meets a fresh, unused section — a used, dirty patch of tape never touches a second end face.
The cassette earns its place where cleaning is repetitive: jumper production, repair benches, and dressing out panels before test. A one-click pen is the pocket tool for one-off cleans in the field; the box is the workstation tool, and because only the core is a consumable — 550+ cleans per core, swapped in seconds — its cost per clean stays the lowest of the three cleaning formats on this site.
Where the K-CB550 works
Jumper and pigtail production lines — clean every end face before test and packing
Part of the Fiber Cleaning range — see the specifications above for the figures that matter on this work.
Repair and refurb benches: bulk cleaning of returned jumpers and adapters
Part of the Fiber Cleaning range — see the specifications above for the figures that matter on this work.
Panel dressing and commissioning: work through a full ODF or distribution panel in one session
Part of the Fiber Cleaning range — see the specifications above for the figures that matter on this work.
Field kits that see volume: pair with one-click pens — the box for the bench and panel work, the pens for the pole and the premises
Part of the Fiber Cleaning range — see the specifications above for the figures that matter on this work.
K-CB550 components
- One K-CB550 fiber cleaning box with one cleaning core fitted (body colour as ordered: green or blue)
Documents for this model
Product Catalog 2026 — this model appears in our full-range catalog (PDF), published in the Downloads center.
User manual — if you need the manual for this model now, ask via the inquiry form below or on WhatsApp and we will send the available documents with your quote.
More fiber cleaning
Questions about the K-CB550
Can the K-CB550 carry our own brand?
Private labeling is made to your requirements and confirmed per order — labels with your logo, part numbers and barcodes on the tools, the inner boxes and the outer cartons, ready for your warehouse. The products most often labeled are the K-35 cleaver, the KS-1 Kevlar shears and the K-870 stripper.
Can we order a small lot, unbranded?
Yes. Neutral stock is held for the core range: small lots are welcome, you can mix models in one shipment, and restock as you sell. Prices are on request — EXW factory pricing.
Ask for a quote — K-CB550
Tell us the quantity, and whether you want it neutral or with your brand on it.